Storm Door Latches and Locks

You Are Here: Home > Storm Door Hardware > Storm Door Latches and Locks

	Screen and Storm Door Latch With 1-3/4" Screw Holes This Screen and Storm Door Latch is a replacement part for outswinging wood or metal storm or screen doors from 5/8 to 1-1/4 ... SDH-105BL, SDH-105BR, SDH-105SI, SDH-105WH

	Screen and Storm Door Touch Bar Latch The Touch Bar Latch is a full width door bar, which on the inside of the door, acts as a latch release. The door opens with a ... SDH-102BR, SDH-102WH

	Screen Door Pull Lever Latch This die cast screen and storm door Pull Lever Latch is similar to our push latches, however, this latch opens with a simple ... SDH-180BL, SDH-180WH

	Storm and Screen Door Universal Door Catch This Door Catch works on any style door. The non-marring roller prevents damage and holds doors in closed position. The body ... SDH-111

	Storm Door 1" Dead Bolt This Storm Door Dead Bolt is made of die cast and is designed to provide extra security for your storm door. It is available ... SDH-113BR, SDH-113GO, SDH-113WH

	Storm Door Brass Mortise Lock With 6-3/4" Screw Holes This Storm Door Mortise Lock has a stamped steel mortise case with solid brass trim plates and low profile handles. It has a ... SDH-181

	Storm Door Brass Thumbturn Cylinder This Brass Thumbturn Cylinder is used with catalog number SDH-181 Storm Door Mortise Lock. ... SDH-182

	Storm Door Deadbolt with 1-3/4" Screw Holes This Storm Door Deadbolt is made of die cast and has mounting holes that are 1-3/4" centre to centre. This deadbolt comes co ... CDH-114BR, CDH-114WH

	Storm Door Interior Latch with 1-3/4" Screw Holes This Storm Door Latch is a replacement part for outswinging wood or metal storm doors from 5/8 to 1-1/4 inch (15.9 to 31.8 mi ... SDH-112BR, SDH-112WH

	Storm Door Interior Latch with 1-3/4" Screw Holes for AluminArt Storm Doors This Storm Door Interior Latch has a lever handle action. The mounting holes are 1-3/4" centre to centre and comes complete ... SDH-109BR, SDH-109WH

	Storm Door Keyed Locking Handle Set The titanium finish on this Storm Door Key Locking Handle Set will allow it to keep its shine with a minimum amount of mainte ... SDH-177

	Storm Door Keyed Push Button for Handle This Keyed Push Button converts a push button latch to a key lock latch operation. ... SDH-118

	Storm Door Keyed Push Button Locking Unit This Keyed Push Button Locking Unit converts a push button latch to a key lock latch operation. ... SDH-117

	Storm Door Push Button Latch With 1-3/4" Screw Holes This Storm Door Push Button Latch is designed for storm doors which are one to 1-1/4 inches (25.4 to 31.8 millimeters) thick. ... SDH-103BL-NK, SDH-103BR-NK, SDH-103WH-NK

	Storm Door Push Button Lock 1-3/4" Screw Holes This Storm Door Push Button Lock requires four holes for mounting, two through holes 1-3/4 inches (45 millimeters) apart for ... SDH-108AL, SDH-108BL

	Storm Door Push/Pull Latch This die cast aluminum finished Push/Pull Latch is designed for doors one inch (25.4 millimeter) to 1-3/8 inches (34.9 millim ... SDH-110

	Storm Door Regal Handle Set for AluminArt Storm Doors This Storm Door Lever Handle Set is made of die cast and is designed for storm doors 2 inches (50.8 millimeter) thick. This ... SDH-106BR, SDH-106WH

	Storm Door Satin Nickel Keyed Locking Handle Set for AluminArt Storm Doors This Storm Door Keyed Locking Handle Set has a satin nickel finish and is a replacement part for AluminArt storm doors. ... SDH-178

	Toll-Free:	1-877-434-3410
	Phone:	(780) 434-3410
	Fax:	(780) 437-1655 / (780) 440-4106
	Email:	info@reflectwindow.com