Same Day Shipping on In-Stock Order Placed by 5pm MST

Home > Supplies > Adhesives > Construction Adhesives > Titebond Heavy Duty Construction Adhesive

Titebond Heavy Duty Construction Adhesive

Part # AD-104




Description
Extremely versatile - bonds most common building materials Titebond Heavy Duty Construction Adhesive is not designed for continuous submersion or for use on polystyrene or polystyrene foams. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive. Application Temperature - 0°F. to 100°F. Service Temperature Range - -20°F. to 120°F. Method of Application - Cartridge/caulking gun Working Time - Approximately 10-20 minutes for a 1/4" bead. Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association. Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.


DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains acetone, hexane and toluene. Keep away from heat, sparks and flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can causeye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can causeentral nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. FIRST AID: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Details:

Part#: N/A

Our Price:

$9.05



You Are Here:

Titebond Heavy Duty Construction Adhesive

Titebond Heavy Duty Construction Adhesive

Click on image to enlarge

Extremely versatile - bonds most common building materials Titebond Heavy Duty Construction Adhesive is not designed for continuous submersion or for use on polystyrene or polystyrene foams. For polystyrene foam, tub surrounds and most other plastics, we recommend Titebond Interior/Exterior Construction Adhesive. Application Temperature - 0°F. to 100°F. Service Temperature Range - -20°F. to 120°F. Method of Application - Cartridge/caulking gun Working Time - Approximately 10-20 minutes for a 1/4" bead. Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Heavy Duty Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw as recommended by the American Plywood Association. Scrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor ’s precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.


DANGER: EXTREMELY FLAMMABLE. VAPOR HARMFUL. Contains acetone, hexane and toluene. Keep away from heat, sparks and flame. Use only with positive cross ventilation. Avoid breathing vapors. Do not swallow. Do not allow eye contact or prolonged skin contact. Uncured product can causeye or skin irritation. Prolonged or repeated overexposure to solvents in uncured product can causeentral nervous system, peripheral nervous system, eye, skin, liver, kidney or respiratory system effects. FIRST AID: If dizziness or other adverse effects are experienced, move to fresh air; call physician if discomfort persists. If eye contact occurs, flush eyes with water for 15 minutes; contact physician immediately. If swallowed, do not induce vomiting; contact physician immediately. Wash skin contact areas with soap and water; contact physician if irritation persists. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.


Part # AD-104

Our Price $9.05





Can't Find a Part?

Our experts can help, just provide some information
or/and a picture of the part you are looking for.

FIND MY PART

Schedule a Free Consultation

Have a project? We can help. Big or small we can provide you with our expertise

SCHEDULE A CONSULTATION

Address:

 

 

Hours:

 

Phone:

Toll Fee:

Fax:

Email:

8711 53 Ave NW, Edmonton,
Alberta, T6E 5E9, Canada
Get Directions


Mon-Fri 8:00am to 5:00pm

 

(780) 434-3410

1-877-434-3410

(780) 437-1655 / (780) 440-4106