Shower Door Polycarbonate "h" Jamb 180 Degree Seal - 3/8" Width

PART # BH-254-3/8

$27.25 USD

PART # BH-254-3/8

Top seller

This Shower Door Clear Polycarbonate "h" Jamb Seal is for use on 180 degree inline glass-to-glass applications. It snaps onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. This shower door seal leaves a clear appearance while serving as a functional seal. The entire "h" Jamb is made of hard polycarbonate. This shower door seal is used by several manufacturers to eliminate water leakage.

Sold By: Length

Finish/Color: Clear

Glazing Thickness: 3/8 in. (10 mm)

Length: 95 in. (2413 mm)

Material: Polycarbonate

Pre-Applied Tape: No

Oversize Items Ship at a Higher Rate. To reduce shipping charges, this item may be cut. Please leave detailed cutting instructions, one cut per length can be made.

$27.25 USD
Glass Thickness
Stock Length
Sold By
In stock

This Shower Door Clear Polycarbonate "h" Jamb Seal is for use on 180 degree inline glass-to-glass applications. It snaps onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. This shower door seal leaves a clear appearance while serving as a functional seal. The entire "h" Jamb is made of hard polycarbonate. This shower door seal is used by several manufacturers to eliminate water leakage.

Sold By: Length

Finish/Color: Clear

Glazing Thickness: 3/8 in. (10 mm)

Length: 95 in. (2413 mm)

Material: Polycarbonate

Pre-Applied Tape: No

Oversize Items Ship at a Higher Rate. To reduce shipping charges, this item may be cut. Please leave detailed cutting instructions, one cut per length can be made.

Get shipping estimates

payment_icons

Reflect Window & Door

Trustpilot